FAMILY OWNED
100% SATISFACTION
2100+ 5-STAR REVIEW
SAME-DAY SERVICE
GFCI/GFI Outlets in Riverside
Riverside, CA, offers much to see and do, including the unique California Citrus State Historic Park. If you’re a homeowner in the Riverside area, having the right wiring and outlets to keep your family and property safe is crucial. For installing and repairing GFCI/GFI outlets in Riverside, trust the experienced, licensed team of professionals at Express Electrical Services to do the job right.
Your Trusted Experts for Safety & Code Compliance
At Express Electrical, we make sure every job we do follows the most up-to-date safety and code rules and guidelines. From obtaining the necessary permits to installing a new GFCI outlet or updating GFCI outlet wiring, no detail is overlooked. We only hire the best technicians certified by the state. Every electrician on our team is well-trained and knowledgeable about every aspect of the industry.
Our trucks are fully stocked with the latest tools, equipment, parts, and components. Whether you need a brand-new GFCI installation or a GFCI repair, we guarantee every job is performed to the strictest safety standards.
GFCI Outlets 101: What You Need To Know
Ground fault circuit interrupter (GFCI) outlets are designed to automatically cut off power to prevent injuries, electric shock, and fires. In most cases, you’ll find a GFCI outlet in areas of your home where water and moisture are present, such as kitchens, bathrooms, garages, basements, laundry rooms, and even outdoors. You should always have an outdoor-rated, weatherproof GFI outlet near pools, spas, or hot tubs.
How do GFCI outlets work? The outlet monitors electrical current levels that pass through it and automatically cuts off the power if it detects an imbalance. This could happen with an unusual power surge or when the outlet comes in contact with moisture or water. These outlets should be installed anywhere within six feet of water.
Local codes require GFCI outlets for all new construction homes and commercial properties. However, they’re also highly recommended in older homes. If you need a GFCI replacement, one of our electricians in Riverside can replace your old non-GFCI outlets with safer GFCI outlets.
Common GFCI Outlet Problems and Solutions
If your GFCI outlet is not working, it could be due to one of several issues. Here are some GFCI outlet troubleshooting tips to help you resolve the problem.
GFCI outlet keeps tripping
A GFCI that keeps tripping is a common problem usually caused by the current running between the primary source of power and the outlet being interrupted too often. GFCI outlets check themselves every second. When it detects a problem with the circuits connected, it trips to turn itself off. This may be caused by faulty or corroded wiring or poor installation.
GFCI outlet won’t reset
If your GFCI outlet won’t reset, it’s likely due to the breaker or circuit being installed too close to a power source. This can cause the outlet to trip, but it won’t reset if there’s an underlying issue. You can try to do some simple GFCI outlet testing to see if it’s just a temporary blip, but it’s best to have an electrician inspect the outlet to see if it must be replaced or moved to a different location.
GFCI outlet isn’t working
A GFCI outlet that stops working could be due to improper installation or a faulty outlet. To troubleshoot, test the outlet and make sure it’s connected to the primary source of electricity and the source of power down the line. If it’s connected properly and still not working, contact Express Electrical to confirm you’re using the right breaker for the circuit and that each breaker has a receptacle box. If the outlet is faulty or installed improperly, it should be replaced with a new one.
Moisture problems
If the receptacle box is wet or moist, your GFCI outlet won’t work because it can’t test for current until everything is completely dry. You can try blowing air into the outlet or using a hair dryer to dry it out, then try again.
Our GFCI Outlet Installation and Repair Services in Riverside
Count on Express Electrical to provide expert GFCI outlet installation and repair services for your Riverside home. These outlets are complex, so hiring an experienced professional will ensure things are done right. Our skilled technicians are trained to install GFCI outlets safely and correctly. We can also make repairs to the outlet if necessary.
Contact Express Electrical for GFCI/GFI Services in Riverside
If you need assistance with GFCI outlet installation or repair in the Riverside, CA, area, our licensed technicians are here to help. We offer 24/7 electrical emergency services and will respond to your request in 60 to 90 minutes. If you’re interested in GFCI outlet installation, replacement, or repairs, contact us today to request service.
Frequently Asked Questions
Yes. One GFCI/GFI receptacle can protect several outlets on the same circuit if it’s upstream from the receptacle as it’s designed to monitor the flow of current on subsequent outlets. If it detects any issues, it will trip and cut the power to every upstream outlet on that circuit.
You can safely use an extension cord with a GFCI/GFI outlet, but only if the extension cord is plugged directly into the outlet. Never use more than one extension cord (i.e., don’t connect two or more extension cords), or the outlet won’t work as intended.
In California, GFCI outlets are required for all 125-volt through 250-volt receptacles in wet areas like bathrooms, kitchens, and outdoors. This is part of California’s Electrical Code (CEC) guidelines.
CITIES WE SERVE
REQUEST SERVICE
"*" indicates required fields