Tripping breakers, blown fuses, and overloaded circuits are your electrical system telling you it can’t keep up. Express Electrical repairs, replaces, and installs circuits and breakers across Los Angeles so your home’s wiring matches what you’re actually asking it to do.
Charging at home is the best part of owning an EV. Plug in when you get home, wake up to a full battery, skip the public charger lines entirely. Express Electrical installs home EV charging systems across Los Angeles: Level 1, Level 2, Tesla Wall Connectors, load balancing, replacement units, and speed upgrades. We handle the 240V circuit, the permitting through LADBS, and the load management if your panel needs help. Customer-supplied chargers or units we source. GreenSky financing available.
Southern California has the highest EV adoption rate in the country. Between state incentives, HOV lane access, gas prices, and the general willingness of Los Angeles residents to adopt new technology, EVs are everywhere. And every one of them needs to charge.
Public charging works in a pinch, but it’s slow (Level 2 public chargers) or expensive (DC fast charging) compared to home charging. A Level 2 home charger gives you the equivalent of $1 to $2 per gallon fuel costs and a full battery every morning. It’s the single biggest quality-of-life improvement that comes with going electric.
The electrical work is the barrier for most homeowners. Running a 240V 50-amp circuit from the panel to the garage, verifying the panel has capacity, pulling the LADBS permit, and passing the inspection. That’s what we do.
A Level 2 EV charger draws 40 to 50 amps. On a 200-amp panel, that’s significant but usually manageable. On a 100-amp panel, it can be most of the remaining capacity.
If your panel can’t handle the full charger load, there are two paths. A panel upgrade to 200 amps adds the headroom. Or a load management device (like a DCC-9 or similar product) shares capacity between your charger and other high-draw equipment automatically. The charger runs at full speed when the AC is off and throttles down when the AC kicks on. It’s a fraction of the cost of a panel upgrade and gets you charging today.
We evaluate your panel during the consultation and recommend the most practical path.
Today, electric vehicles (EVs) are all the rage in the automotive industry, offering unparalleled fuel economy, a quiet, comfortable ride, and, in some cases, even more power than their gas-burning counterparts.
If you buy an electric vehicle, though, you’re going to need a way to charge it. Electric vehicle charging is by far the biggest challenge when you own an electric vehicle. And with EV charging station costs going through the roof, many people are choosing to install their own equipment. But we don’t recommend installing an EV charger yourself.
If you prefer the luxury of charging your electric vehicle from home, Express Electrical Services can help with home EV charger installation near you. Our Tesla-certified installers can provide a wide range of products, including wall-mounted and solar-powered EV chargers.
Installing an electric vehicle charging station requires expertise, especially if you want the convenience of a permanently mounted, hard-wired EV charging station. This type of equipment requires a 240-volt connection to your service panel (hence the need for a trained electrician). There are three general types of EV chargers:
A level 1 EV charging station allows you to plug your electric vehicle directly into a household outlet. No additional equipment is needed. However, you’ll only get about 4.5 miles of range for every hour of charging. Whether that’s sufficient depends on your schedule. But this charge rate is the slowest on the market.
This is the most popular among homeowners with electric vehicles. A Level 2 charger can provide about 70 miles of range per hour of charging. Although the actual charge rate depends on the vehicle, this is many times faster than a Level 1 system. Once an EV charger electrician completes the installation, you can plug in your vehicle overnight or at any time.
A DC fast charger, the fastest on the market, can provide about 40 miles of range for every 10 minutes of charging. Most homes don’t have enough power to operate this system. Cost is also a factor, as a DC fast charger can cost up to $100,000. Typically, you’ll only see one at a commercial EV charging station.
Installing a Level 2 charger isn’t complicated for an electrician. It may require updating your wiring or electrical panel to ensure your home has the voltage capacity to operate the EV charger. For most people, the installation process is technical; one mistake can lead to an electric shock or a fire. It’s best to hire an EV charger electrician to safely install the system so you can have peace of mind when charging up your vehicle.
Fortunately, you can trust Express Electrical Services for high-quality installation as well as:
Our technicians will periodically check for wear and tear and inspect the outlet to see if it needs to be replaced. They’ll inspect the cables for damage as well. Installing a unit indoors protects it against the elements and premature failure. In any case, EV charging station maintenance is crucial as the charger is connected to your home electrical system.
A permit isn’t required to plug a level 1 charger into an existing outlet. But to install a level 2 charger in Los Angeles, you’ll need a permit from the city. Generally, you’ll need a permit from your municipality’s Building and Safety Division before a level 2 EV charger is installed.
Obtaining a permit requires showing your existing electrical system can handle the extra load. Permits often require a licensed electrical contractor to perform the installation and an inspection once the installation is complete. The California Electrical Code requires equipment to be listed by a nationally recognized testing laboratory and installed and fastened per the manufacturer’s instructions. It must also be stored at least 18 inches above the floor inside a home and at least 24 inches above the ground outside.
EV charger products and technology are being updated all the time. As new products come on the market, you may want to consider faster and more reliable charging systems. Our team can help determine if a more efficient charger is suited for your home and help install it.
We recommend hardwiring your EV charging station. It avoids using an extension cable that can create safety hazards. Therefore, a hardwired EV charger is safer and more convenient to use. Once it’s connected to your service panel, you also free up an electrical outlet for other uses.
Some level 2 EV chargers can pull 50 to 60 amps of current. Since there are many devices on the various circuits in your home, we recommend upgrading to a 200-amp panel.
We can help network your EV charger. Whether you want to connect it to your smart home devices or monitor it from your smartphone, our experienced electricians can help. Your system can also be networked with other EV chargers in your community if you so choose.
Electric vehicle chargers don’t come cheap. But that doesn’t mean you can’t experience their convenience. At Express Electrical Services, we offer equipment financing options through Ygrene Works™ and GreenSky to help make EV charger installation more affordable. Some equipment manufacturers also offer financing options. In addition to opportunities to pay over time, state or federal tax credits and utility company rebates may be available.
If you’re looking for a Tesla-certified EV charger installer near you, Express Electrical Services is the expert you can trust. We provide professional EV charger installation and maintenance in Los Angeles and throughout Southern California. Available 24/7, we respond in 60-90 minutes and deliver a quality guarantee. Check back often for coupons and discounts, or learn how our Fix Now, Pay Later program can make EV charger service affordable to you.
Call or Schedule Your Appointment Below!
No challenge is too big for us to handle. Our team approaches even the most difficult tasks with dedication, skill, and a can-do attitude, ensuring we find the right solution every time. We believe in going above and beyond to tackle every problem, delivering results that bring you peace of mind and satisfaction. No matter the complexity, you can count on us to do our very best.
No electrical repair is too big for us to handle. Our team approaches even the most difficult tasks with dedication, skill, and a can-do attitude, ensuring we find the right solution every time. We believe in going above and beyond to tackle every problem, delivering results that bring you peace of mind and satisfaction. No matter the complexity, you can count on us to do our very best.
Most Level 2 installs take half a day if the panel has capacity. If a panel upgrade is needed, that’s a separate job done first.
Yes. EV charger circuits require permits and inspections through LADBS or the relevant local authority.
We install customer-supplied chargers. Just make sure it’s UL-listed and compatible with your vehicle.
Yes. Outdoor-rated chargers are available for driveways and carports. We use weatherproof conduit and outdoor-rated enclosures.
We serve Los Angeles County, Orange County, Ventura County, and Riverside County.
At Express Electrical Services, we are committed to ensuring that individuals with disabilities enjoy full access to our website. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (323) 204-4132 or email us at cs@expresselectricalservices.com and place ‘Web Content Accessibility (ADA)’ in the subject heading and we will make all reasonable efforts to assist you.
