Specialty Circuits and Appliance Power in Los Angeles, CA

Your range, dryer, HVAC, and hot tub each need their own dedicated circuit from the panel. Express Electrical installs appliance circuits across Los Angeles with the correct wire gauge, breaker size, and outlet for every application.

Our Specialty Circuits and Appliance Power Services

Major appliances don’t share well. Your range, dryer, HVAC system, and hot tub each pull enough power that they need their own dedicated circuit from the panel. The wrong wire gauge, the wrong breaker size, or a shared circuit creates tripping, voltage drops, and premature equipment wear. Express Electrical installs appliance circuits across Los Angeles. Properly sized, correctly wired, permitted, and inspected.

Request Your Call From Express

Appliance Circuits (General)

Refrigerators, dishwashers, garbage disposals, microwaves, and other appliances that code requires on their own circuit. We install dedicated lines with proper breaker sizing and outlet placement.

Range and Oven Circuit (240V)

Electric ranges and wall ovens need a 40 or 50-amp 240V circuit. Switching from gas to electric? We install the circuit, outlet, and handle the permit.

Dryer Circuit (240V)

Electric dryers need a 30-amp 240V circuit with a NEMA 14-30 outlet. New dryer hookup, three-prong to four-prong upgrade, or relocating the dryer? We wire it.

HVAC and Mini-Split Circuit

Condensers, mini-splits, heat pumps, and air handlers each need a dedicated circuit with the correct breaker, wire gauge, and disconnect box. We match the specs to the manufacturer’s requirements.

Hot Tub and Spa Circuit

Hot tubs typically need a 50-amp 240V dedicated circuit with GFCI protection and a disconnect within sight of the tub. We handle the full electrical scope with code-compliant bonding.

New Circuit Installation

General-purpose circuits for rooms, additions, and areas that don’t have enough power. We run new lines from the panel with proper sizing and code-required protections.

Gas-to-Electric Conversions

LA’s electrification trend is driving a wave of gas-to-electric conversions. Homeowners switching from gas ranges to electric induction cooktops, from gas dryers to electric, and from gas furnaces to heat pumps. Each conversion requires a new 240V circuit because the gas version didn’t need one.

We install these circuits regularly. The scope includes running the wire from the panel to the appliance location, installing the correct outlet or hardwired connection, and permitting the new circuit. If the gas line needs capping, a licensed plumber handles that separately.

Hot Tub and Spa Wiring

Hot tubs mix electricity and water, so the requirements are strict. A 50-amp or 60-amp 240V dedicated circuit. A GFCI breaker at the panel. A disconnect switch within line of sight of the tub but no closer than 5 feet from the water. Bonding of all metal within 5 feet. We follow NEC requirements and manufacturer specifications precisely, because there’s no margin for error on this type of work.

Frequently Asked Questions

Can my panel handle another 240V circuit?

It depends on available capacity and breaker slots. A load calculation tells you whether you have room or need an upgrade first.

Do appliance circuits need permits?

New 240V circuits and dedicated appliance circuits generally require permits and inspections. We handle the paperwork.

Can I plug my electric range into a dryer outlet?

Only if the outlet type and circuit rating match the range’s requirements. They look similar but aren’t always interchangeable.

What areas do you cover?

We serve Los Angeles County, Orange County, Ventura County, and Riverside County.

Ready to get started?

 Call or Schedule Your Appointment Below!

Customer Review

Coupons & Deals

No challenge is too big for us to handle. Our team approaches even the most difficult tasks with dedication, skill, and a can-do attitude, ensuring we find the right solution every time. We believe in going above and beyond to tackle every problem, delivering results that bring you peace of mind and satisfaction. No matter the complexity, you can count on us to do our very best.

Upgrade Your Panel – New Install for as low as $79/month!
Financing is available for panel upgrade.
Call our team for more details. Parts and additional work extra. Restrictions may apply.
Free Panel Replacement Estimate
On-site assessment and quote for panel replacement.
Panel replacement quotes only. Restrictions may apply.
$49 Troubleshooting Special
Includes 2 outlets or 1 light.
Standard outlets/lights only. Parts and additional work extra. Restrictions may apply.

Areas We Serve in South California

No electrical repair is too big for us to handle. Our team approaches even the most difficult tasks with dedication, skill, and a can-do attitude, ensuring we find the right solution every time. We believe in going above and beyond to tackle every problem, delivering results that bring you peace of mind and satisfaction. No matter the complexity, you can count on us to do our very best.

Los Angeles County, CA

Ventura County, CA

Orange County, CA

Americans with Disabilities Act (ADA) Notice

At Express Electrical Services, we are committed to ensuring that individuals with disabilities enjoy full access to our website. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (323) 204-4132 or email us at cs@expresselectricalservices.com and place ‘Web Content Accessibility (ADA)’ in the subject heading and we will make all reasonable efforts to assist you.